Sapphire Radeon R9 Fury Tri-X Pictures and Specifications Leaked - Sticks To Reference PCB, Triple Fan Cooling
Sapphire's Radeon R9 Fury Tri-X graphics carte du jour has been leaked by Videocardz, confirming the specifications and other details regarding models that are made past AMD'due south AIB partners. The Sapphire Radeon R9 Fury is expected to striking the retail channel in a few days at a price of just $549 US and features a cut down Fiji GPU which is meant to feature a more optimized cost compared to the $649 US price of the flagship, Radeon R9 Fury X.
Sapphire Radeon R9 Fury Tri-X Specifications and Pictures Leaked
A few days ago, it was reported that the Radeon R9 Fury (Non-Ten) will be based on a cut downwardly Republic of the fiji islands GPU. The new GPU will obviously be slower than the Radeon R9 Fury X but come up at a price of $100 U.s.a. along with custom built cards from AIBs like the ane we are looking at from Sapphire. The AMD Fiji Pro GPU is based on a 28nm process and is the single largest chip AMD has e'er produced. The bit which measures around 596mm2 has a total of viii.nine Billion transistors crammed under its hood. Existence a cut down SKU, the Fiji Pro has 7.ii TFlops of compute as compared to eight.9 TFlops on the total fat Fiji chip.
The Radeon R9 Fury will fall beneath the R9 Fury X which all the same makes information technology a powerful carte du jour, information technology is based on the 28nm process which has gotten old but is now matured enough to exist used to designed the ultimate GPUs (GM200 / Fiji XT). The Radeon R9 Fury comes with 56 compute units which pack 64 stream processors each, total of these corporeality to 3584 stream processors, 64 Raster functioning units and 224 texture mapping units. The engine clock for the Radeon R9 Fury is maintained at thou MHz which is 50 MHz slower than the Radeon R9 Fury X. Custom cards will be overclocked out of box equally Sapphire clocks their cards at thou MHz and besides 1040 MHz (Two cards). The GPU churns out a full of 7.2 TFlops of compute performance as mentioned above which is effectually the same league as the GeForce GTX Titan Ten.
The bill of fare besides features 4 GB of HBM VRAM that is clocked at a 500 MHz (1.0 Gbps data rate). The retentivity runs across a 4096-fleck bus interface has has a bandwidth of up to 512 GB/s. The carte tin can stick to the same power configuration of dual 8-Pin connectors and has a lath power of 275W. Display outputs include iii display connectors and a single HDMI port. The card will have back up for side by side generation APIs such equally DirectX 12 and supports Freesync, VSR and Frame Rate Target Control.
The Sapphire model features the Tri-X cooling that makes use of a triple fan solution and is huge as ever with a large aluminum fin array heatsink that spans the entire length of the cooler. This heatsink makes contact to the Fiji GPU and HBM Retention fries that are situated on the same substrate dice. The heatsink has several copper based heatpipes but the more surprising thing is that Sapphire makes use of a reference PCB that'due south featured on the Radeon R9 Fury X too. This is something to be concerned about as this indicates that Sapphire, beingness AMD's major AIB partners still has been unable to produce a custom PCB blueprint and will stick to reference solution. NVIDIA was targeted by the masses for non allowing custom solutions of their Titan cards simply it seems like AMD might be doing the aforementioned with their own cards which are restricted to exist modified only on the cooling front.
The Sapphire Radeon R9 Fury Tri-X is expected at a price of $549 Us while the Sapphire Radeon R9 Fury Tri-X OC can retail at a price close to $599 US. If custom cards stick to the reference PCB, we tin can expect the same overclocking potential as reference cards which isn't much to brainstorm with. Expect the card in markets in a few days.
AMD Radeon R9 Fury Specifications:
| WCCFTech | AMD Radeon R9 Fury X2 | AMD Radeon R9 Fury X | AMD Radeon R9 Nano | AMD Radeon R9 Fury | AMD Radeon R9 290X |
|---|---|---|---|---|---|
| GPU | Fiji XT x 2 | Fiji XT | Republic of the fiji islands XT | Republic of the fiji islands Pro | Hawaii XT |
| Stream Processors | 8192 | 4096 | 4096 | 3584 | 2816 |
| GCN Compute Units | 128 | 64 | 64 | 56 | 44 |
| Render Output Units | 128 | 64 | 64 | 64 | 64 |
| Texture Mapping Units | 512 | 256 | 256 | 224 | 176 |
| GPU Frequency | TBA | Upwards to 1050Mhz | Upwardly to 1000 MHz | Up to yard MHz | 1000Mhz |
| Retentivity | 8GB HBM (4 GB Per Chip) | 4GB HBM | 4GB HBM | 4GB HBM | 4GB GDDR5 |
| Retentivity Interface | 4096-bit x 2 | 4096bit | 4096bit | 4096bit | 512bit |
| Memory Frequency | 500Mhz | 500Mhz | 500 MHz | 500Mhz | 1250Mhz |
| Constructive Memory Speed | 1Gbps | 1Gbps | 1Gbps | 1Gbps | 5Gbps |
| Memory Bandwidth | 1024 GB/s | 512GB/due south | 512GB/s | 512GB/s | 320GB/s |
| Cooling | Liquid | Liquid, 120mm Radiator | Air, Unmarried Fan. Custom AIB Solutions Later | Air, Custom AIB Solutions | Air, Single Blower Fan |
| Functioning (SPFP) | 17.2 TFLOPS | 8.6 TFLOPS | viii.nineteen TFLOPS | 7.ii TFLOPS | 5.6 TFLOPS |
| TDP | TBA | 275W | 175W | 275W | 250W |
| Power Connectors | Dual viii-Pin | Dual eight-Pin | 8-Pin | Dual 8-Pivot | six+8 Pin |
| GFLOPS/Watt | TBA | 31.3 | 47.1 | 26.2 | 19.3 |
| New Prices | TBA | $649 | $499 | $549 | $299 (Retail) |
| Launch Date | Early on 2022 | 24th June 2022 | 7th September 2022 | 10th July 2022 | 24th October 2022 |
Source: https://wccftech.com/sapphire-radeon-r9-fury-trix-pictures-specifications-leaked-sticks-reference-pcb-triple-fan-cooling/
Posted by: cornettmothesseze.blogspot.com

0 Response to "Sapphire Radeon R9 Fury Tri-X Pictures and Specifications Leaked - Sticks To Reference PCB, Triple Fan Cooling"
Post a Comment